Tips to Improve Output Quality in OJOsoft DVD to AVI Converter

Best Ways to Use OJOsoft DVD to AVI Converter for Fast DVD RipsRipping DVDs quickly while keeping acceptable quality requires the right balance of software settings, hardware, and workflow. OJOsoft DVD to AVI Converter is a straightforward, lightweight tool that many users choose for simple DVD→AVI jobs. This article explains practical steps and best practices to get fast DVD rips with good results using OJOsoft DVD to AVI Converter — covering preparation, recommended settings, batch workflows, hardware tips, and troubleshooting.

1. Prepare your source and environment

• Inspect the DVD: make sure the disc is clean and free of scratches. A dirty or damaged disc will slow read speed and increase read errors.
• Use a reliable DVD drive: faster, higher-quality DVD drives (8x–16x and above) generally read more consistently and help speed up ripping.
• Free up system resources: close background apps (browsers, cloud sync, antivirus scans) to give OJOsoft and the drive full CPU and I/O access.
• Update drivers and firmware: ensure your optical drive firmware and system chipset drivers are current to avoid performance bottlenecks.

2. Choose the right target format and codec for speed

• Use AVI with a fast codec:
  • Xvid or DivX offer a good balance of speed and compatibility; Xvid tends to be faster on many systems.
  • MS MPEG-4 v2 and other legacy codecs can be faster but may produce lower quality for the same bitrate.
• Avoid computationally expensive codecs if speed is the priority (e.g., modern H.264 encoders can be much slower).
• If you only need compatible playback on common players, choose a standard AVI profile rather than custom advanced encodings.

3. Adjust resolution and bitrate for faster processing

• Lowering resolution reduces encoding time substantially. Convert DVD 720×480 (NTSC) or 720×576 (PAL) to 640×480, 560×416, or 480×360 to speed encoding with minimal perceived quality loss for smaller screens.
• Reduce bitrate: encoding time scales with bitrate and codec complexity. For quick rips:
  • 700–900 kbps for single‑screen mobile viewing,
  • 1200–1800 kbps for general desktop viewing,
  • 2000+ kbps only if you need higher fidelity and can accept slower encoding.
• Use one-pass encoding where possible. Two-pass yields better quality/bitrate allocation but doubles processing time.

4. Optimize OJOsoft settings for throughput

• Choose single pass encoding: in the OJOsoft options, select one-pass mode if available for faster results.
• Turn off filters you don’t need: deinterlace, denoise, or sharpening filters add processing time.
• Disable subtitle burning if not needed; extracting subtitles separately is often faster.
• Use fast encoding presets: many builds of OJOsoft include simple “Fast” or “High Speed” presets — use them for quick rips.

5. Use batch mode and queue effectively

• Batch multiple titles: rip all required titles (main movie, extras, episodes) to the queue so the process runs unattended.
• Source ordering: put longest rips first if you want shorter outputs available sooner, or last if you plan to check their results after earlier quick items.
• Enable automatic shutdown or sleep prevention if you’ll be away while a long batch runs.

6. Hardware-focused speed improvements

• Use an SSD as your working drive: writing encoded files to an SSD is faster than a mechanical HDD, improving overall throughput.
• Increase RAM if your system is low: insufficient RAM forces more disk I/O and slows encoding.
• Use a faster CPU or enable multiple CPU cores: OJOsoft’s encoder can benefit from higher single-thread speeds; if it supports multi-threading, more cores will help. Check the version’s encoder support.
• Use a dedicated GPU only if OJOsoft explicitly supports GPU-accelerated encoding (most older versions did not). If not supported, GPU won’t help.

7. Workflow tips for consistent, fast results

• Rip main movie only: many DVDs contain extras and multiple angles — choose the main title to save time.
• Create a template output profile: save a preset with resolution, codec, and bitrate you use often.
• Verify a short sample rip: encode the first 1–2 minutes with your settings to ensure quality and speed meet expectations before committing to the full disc.
• Maintain an organized folder structure and consistent naming to simplify batch processing and later backups.

8. Troubleshooting common slowdowns

• Read errors or retries: if ripping stalls, inspect the disc and test the drive with another DVD. Deep scratches may require slower read speeds or specialized recovery tools.
• High CPU usage from other apps: check Task Manager (Windows) for background processes consuming CPU and memory.
• Antivirus scanning: add OJOsoft and your DVD drive’s temp folders to exclusions, or temporarily pause antivirus during ripping.
• Incompatible codec settings: if encoding stalls or fails, switch to a more compatible codec preset (e.g., Xvid) and test again.

9. Balancing speed vs. quality — recommended presets

• Fast mobile rip (speed priority): AVI — Xvid, 480×360, VBR 700–900 kbps, one-pass.
• General-purpose quick rip (balanced): AVI — Xvid, 640×480, VBR 1200–1500 kbps, one-pass.
• Higher quality (slower): AVI — Xvid/DivX, 720×480 (no scale), VBR 2000+ kbps, two-pass.

10. Legal and ethical reminder

Ripping DVDs you own for personal backup or format-shifting is treated differently by law depending on your country. Ensure you comply with local copyright laws and the DVD’s licensing terms.

Using these steps — pick fast codecs/presets, reduce resolution/bitrate sensibly, optimize system resources, and batch intelligently — will get you the fastest practical DVD→AVI rips with OJOsoft DVD to AVI Converter while keeping acceptable quality.